Palm Wax White

Palm Wax White

This commercial grade plain palm wax is suitable for blending with soy or use it on its own to make a scented container candle or small pillar candle. Sourced from RSPO certified suppliers to ensure our support for the the environment.

Specifications

Instructions

Melt the wax to the suggested fragrance temperature before adding your fragrance. Stir fragrance for at least 2 minutes and allow the wax to cool to the recommended pour temperature before pouring to your jar or mold. Experiment with blending palm wax with soy and/or beeswax to your required percentage to adjust the hardness of the wax.

Adding Fragrance to Palm Wax

You may have noticed some conflicting information above; the pour temperature of this palm wax is higher than the recommended temperature for adding fragrance. This is not a typo. It’s true that palm wax needs a high pour temperature to achieve the desired effect (that’s a whole chemistry lesson in and of itself). It’s also true that fragrances should be added at lower temperatures, closer to the melt point of the wax. This translates to usually around 70-75’C. This is to stop the fragrance boiling off and losing some of its top notes and potency.

So it becomes a quandry, that can only really be resolved by acknowledging that one must find a balance between the competing ideals. At temperatures above 85C most of the fragrances you get from us will lose some top notes if stored at that temperature for too long. One way to find a good balance would be to pour the fragranced wax hot, i.e. at 90C, but do not let it sit at that temperature for long between adding the fragrance and pouring. Every fragrance will be different but try experimenting to see if you can add the fragrance at around 75 degrees then gently increase the temperature before pouring at around 90C. It’s a balancing act between two competing and equally true principles and, as always, testing is the best way to learn to make fragranced pillar candles from palm wax.